Yadda za a Yi Amfani da Zaman Zaka don Cire Vinyl Siding

01 na 03

Nemi kayan aiki na akwatin saƙo

Rikicin Vinyl yana da dindindin kuma yana da dindindin, amma zai iya fashe ko kuma bata lalacewa . Zaka iya cire lalacewar lalacewa kuma maye gurbin su, amma wannan yana buƙatar rabu da ɗakunan da aka ɓoye da kulle guda tare. Shigar da kayan aiki na zip. Wannan kayan aiki mai mahimmanci ya fi ƙarfin gilashi tare da ƙananan ƙugiya a ƙarshen ɗaya kuma ya lanƙwara a daidai kusurwar dama. Yana ba ka damar samun ƙarƙashin gefen saman da kasan gefen ɓoye na vinyl inda ƙuƙumman kewayawa (zane wanda zai ba su damar tsayayya da iska da danshi). Mafi mahimmanci, ba za ku lalata siding a cikin tsari ba.

Lokacin da ya maye gurbin vinyl siding, zai iya zama da wuya a samo kayan abin da ya dace saboda masu sarrafa shinge a kai a kai suna canza canje-canje kuma su daina tsofaffi da launi. Zai fi kyau idan kana da wasu kayan kayan da aka rage daga asalin siding. Idan baza ku iya samin ainihin wasa ba, ku ɗauki abin da kuka lalacewa zuwa mai ba da gudummawa kuma ku nemi samuwa mafi kusa.

Bukatun da ake Bukata:

• Zip kayan aiki
• Flat pry bar
• Kusa
• Wood blocks
• Siding maye gurbin
• 1 1/4-inch kusoshi kusoshi

02 na 03

Yadda za a Yi Amfani da Zaman Zaka don Cire Vinyl Siding

Kungiyar Vinyl shinge an rufe su a saman gefuna da kasa ta hanyar tashoshin J da ake kira buttlocks. Kowace kwamiti yana rufe ɗakin da ke ƙasa da shi kuma yana kulle cikin wuri tare da haɗin gwiwa. Yi amfani da kayan aiki na zip don saki katangar a saman da kasa na yanki da kake so ka cire, kamar haka:

1. Fara a gefen ƙasa na siding siding panel: Wiggle da mai lankwasa tip na zip kayan aiki ruwa a karkashin wani sako-sako da wuri a daya ƙarshen panel, ƙuƙwalwa kayan aiki a kan baya lebe na guile.
   
   Tip: Lo ok don karamin karamin karar a ƙarshen panel, wanda aka tsara don kayan aiki na zip don zugawa cikin. Ko kuma, zaku iya nemo wani wuri mai launi tare da tsawon haɗin ginin.
2. Rarrabe haɗin gungura tare da matsa lamba a kan kayan aikin zip. Sa'an nan, zuga kayan aiki tare da tsawon siding panel don sakin sauran sauran haɗin gwiwa.
3. Maimaita wannan tsari don buɗewa zuwa haɗin haɗin gwiwa da ke riƙe da lalacewar panel zuwa panel a sama.
4. Ɗaga saman gefen panel a sama-a hankali-don nuna alamomi (da kusoshi) a kan lalacewar kwamitin.
5. Yi amfani da ma'aunin pry da ƙuƙwalwa don pry fitar da dukkan kusoshi a cikin ɓarna na ɓangaren lalacewar, sannan cire shafin.

03 na 03

Yadda za a Shigar da Sabon Kungiyar Vinyl Siding

Sanya wani ɓangaren maye gurbin vinyl siding shine baya don cire sashin lalacewar. Na farko, kuna ƙulla sabon yanki, to, ku haɗa da bututu tare da kayan aiki na zip:

1. Sanya guntu na itace a bayan sashin layi na sama a saman yankin da aka cire don riƙe shi daga bango. Matsayi tubalan don haka baza su tsoma baki tare da sabuwar panel ba.
2. Sanya wuri mai sauyawa a kan bango, ƙuƙasa ƙashin ƙasa a kan kwamitin da ke ƙasa. Tura a kan sabon rukunin don ɗaukar ƙuƙwalwar ƙananan ƙira a kan layin da ke ƙasa.
3. Tsayar da sabon rukuni ta hanyar tuki kusoshi 1 1/4-inch a cikin rami a cikin ɗakunan da ke kan iyaka, kowane mai inci 16 ko haka. Idan yana da wuyar isa kusoshi tare da guduma, sanya mashigin pry a kan kan ƙusa, sa'an nan kuma buga ginin pry tare da guduma don fitar da ƙusa.
   
   Lura: bar ƙusoshin ƙusa game da inch 1/32 a sama da farfajiya na siding; Wannan ya sa izinin siding tare da fadadawa da haɓakawa. Har ila yau, sanya kusoshi a cikin cibiyoyin dakunan raguwa, don ba da izinin tafiya na gefe zuwa gefe.
   
4. Tsare kullin ƙwanƙolin babba zuwa saman gefen sabon panel, ta yin amfani da kayan aiki na zip. Ɗauki murfin allon ƙyama tare da kayan aiki sannan a cire shi a kan sabon gefen kullun. A lokaci guda, yi amfani da hannunka don turawa daga waje na babban taro zuwa ga bangon don ƙwaƙullin ƙwanƙwasa a wuri. Yi aiki daga wannan ƙarshen sabon rukuni zuwa wancan, ta rufe dukkan gefen baki.