Canja wurin Dutsen Plank

01 na 07

Sauya wata katako ta katako

Sauya madauki, tsagawa, ko gurbin lalacewa marar lalacewa ya zama kamar sauƙi kamar yanke katakon tsohuwar kuma ya maye gurbin shi da sabon abu. Ƙarshe mataki kawai shine shigar da ginshiƙai na katako tare da mahaukaci (mambobin gine-gine na kwance masu goyan baya). Wannan hanya tana aiki sosai idan ba ka so ka cire kuma maye gurbin dukan kwamitin. A madadin, za ku iya cire tsohon akwatin gaba ɗaya kuma ku maye gurbin shi tare da tsawon lokacin da ya saba daidai.

Bukatun da ake Bukata:

• Kariyar ido
• Gudun mita
• Fensir
• Jigsaw
• Motar direba
• Akwatin kulawa 2x4 mai ƙarfin zuciya, 24 inci tsawo
• Matakan zane
• Rabe-rabe da aka gani ko kuma miter (zaɓi)
• 1/8-inch drill bit
• 2 1/2-inch da 3-inch dunƙulen sukurori
• Gidan katako na katako wanda ya dace da allon tsohuwar katako
• Tsuntsaye itace gama (kamar yadda ake bukata)

02 na 07

Shirya Yanke

Binciken yanki a kusa da ɓangaren lalacewar jirgi, la'akari da wurare na maƙwabcin da ke kewaye. Makasudin shine ya yanke sashin lalacewa kuma tsaftace gyara kamar yadda ya kamata. Zai fi kyau idan cututtuka sun kasance akalla sa'a guda ɗaya daga gidajen haɗin kan kowane allon da ke kusa. Yankin da aka yanke zai zama aƙalla akalla wurare guda biyu, don kwanciyar hankali na dogon lokaci. Gano maɗaurorin biyu inda za ka sa yanke don cire ɓangaren ɓangaren ɓangaren katako. Yi amfani da madaidaicin filin don nuna alamar kwalliya marar kyau tare da fuskar fuskokin kowannensu.

03 of 07

Cire Lalacin Ƙananan

Sanya ido a ido. Yanke tare da layin da aka lakafta a kan jirgin ruwan, ta amfani da jigsaw. Zaka iya amfani da madaidaicin filin don jagorantar sawun, idan kuna da dadi tare da wannan fasaha. In ba haka ba, kawai bi layin a hankali don yanke madaidaiciya. Dole ne ya kamata a yanke gefen dama a cikin fuskar fuska. Cire kullun gyaran ɓangaren ɓangaren lalata, ta yin amfani da direba mai haɗari (idan an kulle jirgi, kusa sama da kusoshi tare da kaya na cat ko pry bar). Cire sashen ginin.

04 of 07

Yanke Masarrafan Talla

Yanke sassan biyu na tsawon karfe 12-inch na katako 2x4 don ginshiƙan talla, ta hanyar amfani da madogara mai mahimmanci, maɗaura, ko jigsaw. Kusa biyu ramukan jirgi a cikin kowane sashi, kimanin 2 inci daga kowane ƙarshen, ta yin amfani da raguwa da 1/8-inch bit.

05 of 07

Shigar da takardun goyon baya

Matsayi kowane shinge akan daya daga cikin fuskoki na masu haɗari inda ka sanya cututtukan don haka shingin yana tsakiyar a buɗe inda aka cire hukumar. Ɗauki asalin don haka yana da matukar damuwa akan ɗakunan da ke kewaye da katako. Tsayar da toshe ga maigida da hudu 2 1/2-inch dunƙulen sukurori. Shigar da sassan biyu tare da yin amfani da wannan fasaha.

06 of 07

Yanke Wuta Deck

Yanke sabon jirgin ruwan kwalliya don ya dace da shinge a cikin yanki. Ka lura da alamar ƙirar matsala ta komfurin maye gurbin: Idan zobba na hatsi na ƙarshe sun kasance daidai da launi na katako (hatsi a gefen gefen gefen gefe), matsayi katako don haka madauran zobba suna fuskantar (wannan ake kira haushi gefen kuma ya nuna inda kuka kasance akan itacen). Idan hatsi ya kasance daidai da ginin ginin (hatsi yana gudana sama da ƙasa), zaka iya sanya katako ko wata hanya, amma idan yana da ƙananan kofi, ko ƙoƙari, sanya shi tare da gefen ƙusa da ke fuskantar sama. Wannan zai taimaka wajen hana kayan cin kofin a matsayin jirgi.

07 of 07

Shigar da kwamiti na New Deck

Sanya jirgi a kan ginshiƙan goyon baya tare da gefen gefen ko gefen geca na fuskantar ƙasa. Kusa biyu ramukan jirgi a cikin jirgi a kowace iyakar, kimanin 3/4 inch daga ƙarshen (don haka ramukan suna tsakiya akan farɗan tallafi). Har ila yau, yin haɗari biyu na ramukan jirgi a kowane bangare da ke nuna cewa jirgin yana kan gaba. Tsayar da jirgi zuwa kowane nau'i na goyan baya (kuma duk wani mai shiga) tare da ɓangare na 3-inch. Kammala sabon jirgi don kare shi daga weathering da kuma dace da canza launi na yanzu.